Guide updates and tuning notes by email → Follow us

Home › Cams › Brian Tooley Racing LS1/LS2 Stage 1 V2

Brian Tooley Racing LS1/LS2 Stage 1 V2 cam: specs, price & owner results

217/23X .615"/.636" 113 LSA

An X in a spec is a digit the cam maker does not publish (22X means somewhere from 220 to 229). We show it as text and leave it out of number filters and sorting.

SpecValue
Part numberBTR-LS1STAGE1
EngineGen III/Gen IV LS
ApplicationNATURALLY ASPIRATED
StyleHYDRAULIC ROLLER
Cam boltTHREE BOLT
Duration @ .050 (int/exh)217/23X (exhaust not published: the maker gives only the first digits, so exhaust 230–239°)
Lift (int/exh).615/.636
LSA113.0
Idlemild
Price$409.99 (Brian Tooley Racing, 2026-09-29)

We may earn a commission when you buy through links on this page.

Buy it: Brian Tooley Racing LS1/LS2 Stage 1 V2 cam

Parts to install it: cam bolts (3-bolt); 7.400 in. pushrods (hardened; 7.400 in. is stock length, so measure first); timing cover gaskets (the front cover comes off to change the cam); timing chain (replace it on a high-mileage engine or with a big cam); valve springs (.660 in. lift) — stock springs aren't made for this cam. More: LS cam swap guide.

Tuning checklist
  • Tune: Aftermarket cams need idle, fuel, spark and torque-model changes.
  • Converter (automatics): Aftermarket converter helps, not always needed
  • Idle: Mild
  • Cam gear: Three bolt
From the cam maker's description and our cam tuning guide. Confirm with your tuner. What else does the tune need? →

What owners report with this cam

Owner-reported numbers — exploratory, not verified. Dynos, heads, supporting mods and tunes differ; use these as a rough range, not a promise.
1NA rear-wheel reports (the count the cam finder shows)
423median rear-wheel hp, NA (low-confidence reports excluded)
423–423range, same basis
1reports in total, incl. boosted, crank-hp and low-confidence (listed below)
EngineHeadsHPTQMeasured atAdderConfidence
LS2CNC ported423398WheelNAMedium

Installing it? Follow our LS cam swap guide (Gen III and Gen IV, any chassis), with every torque spec you need. In a 1998–2002 Camaro or Firebird, the F-body cam and valve spring swap goes bolt by bolt.

← All cams in the cam finder

Build a turn-on tune sheet for this cam → Idle and spark starting values, from real tunes. Always finish on a dyno.

New Already running this cam? Send us your tune and we'll compare it with similar builds and tunes we've reviewed. Get a Tune Report → $19, free while we launch.