Home › Cams › Brian Tooley Racing LS1/LS2 Stage 2 V2 Camshaft - BTR-LS1STAGE2
Brian Tooley Racing LS1/LS2 Stage 2 V2 Camshaft - BTR-LS1STAGE2 cam: specs, price & owner results
221/24x .624"/.636" 112 LSA
An X in a spec is a digit the cam maker does not publish (22X means somewhere from 220 to 229). We show it as text and leave it out of number filters and sorting.
| Spec | Value |
|---|---|
| Part number | BTR-LS1STAGE2 |
| Engine | Gen III/Gen IV LS |
| Application | NATURALLY ASPIRATED |
| Style | HYDRAULIC ROLLER |
| Cam bolt | THREE BOLT |
| Duration @ .050 (int/exh) | 221/24X (exhaust not published: the maker gives only the first digits, so exhaust 240–249°) |
| Lift (int/exh) | .624/.636 |
| LSA | 112.0 |
| Idle | moderate |
| Converter | Aftermarket stall converter recommended |
| Price | $409.99 (Brian Tooley Racing, 2026-09-29) |
We may earn a commission when you buy through links on this page.
Buy it: Brian Tooley Racing LS1/LS2 Stage 2 V2 Camshaft - BTR-LS1STAGE2
Parts to install it: cam bolts (3-bolt); 7.400 in. pushrods (hardened; 7.400 in. is stock length, so measure first); timing cover gaskets (the front cover comes off to change the cam); timing chain (replace it on a high-mileage engine or with a big cam); valve springs (.660 in. lift) — stock springs aren't made for this cam. More: LS cam swap guide.
- Tune: Aftermarket cams need idle, fuel, spark and torque-model changes.
- Converter (automatics): Aftermarket stall converter recommended
- Idle: Moderate
- Cam gear: Three bolt
From real tunes on similar cams
We don't have enough tunes on this exact cam yet, so this is what tunes on similar cams run at idle (within 6° intake duration at .050 and 2° LSA of this one; as of 2026-10-15). Idle settings follow the cam closely; WOT fuel and spark depend on the rest of the build, so they aren't shown here. Gen III and Gen IV computers use different idle tables, so they are listed separately.
9 naturally aspirated tunes on similar cams, Gen III computers (0411/P01, P59)
engines: 4.8 L, 5.7 L, 5.9 L, 6.0 L; computers: P01, P59.
| Setting | Range | Median | Tunes |
|---|---|---|---|
| Hot idle target | 700 rpm to 900 rpm | 825 rpm | 9 |
| Warm idle airflow, in gear | 7.6 g/s to 11.8 g/s | 9.8 g/s | 9 |
| Idle spark (around 800 rpm) | 18° to 28° | 22° | 9 |
What these tunes run, not your numbers: heads, injectors, converter, fuel and altitude all change what your engine wants. For starting values built for your engine, injectors and fuel, use the turn-on tune builder. A turn-on tune only gets it running: always finish on a dyno, and read our safe tuning limits before any wide-open pass.
Installing it? Follow our LS cam swap guide (Gen III and Gen IV, any chassis), with every torque spec you need. In a 1998–2002 Camaro or Firebird, the F-body cam and valve spring swap goes bolt by bolt.
Build a turn-on tune sheet for this cam → Idle and spark starting values, from real tunes. Always finish on a dyno.
New Already running this cam? Send us your tune and we'll compare it with similar builds and tunes we've reviewed. Get a Tune Report → $19, free while we launch.